Quality & Innovation
TOLL FREE   800.423.0970   |   860.666.9685Our phones are down right now and won’t be up and running until Oct. 20th. Please contact us via Email - Nowak@nowakproducts.com We apologize for the inconvenience.


Assembly Instructions

1. Slide the Wedge Wear Ring onto the Inner Sleeve with the radius on the Wear Ring facing up.

2. Match key on Inner Sleeve with keyway in Outer Housing and insert.

5. Slide Pressure Collar Assembly onto Inner Sleeve. Remember that "flats" on Rotation Lock must be parallel to fit into machined slot in the Inner Sleeve.

3. Replace Matched Set of Wedges

NOTE: Be sure angle of wedge is facing radius on Wear Ring.

6. Tighten Button Head Screw

NOTE: The screw must go through the hole in the Inner Sleeve.

4. Insert Rotation Lock and partially thread Button Head Cap Screw. Position Rotation Lock to allow hex to fit into machined slot on Inner Sleeve. Replace Holding Pins.
7. Replace Clamp Screw. Remove Plug Screw and lubricate unit. Use lubrication chart for frequency and unit volume.


The Parts you need to keep business moving forward

New Davenport® replacement parts

Check out our standard Davenport replacement part list!

Used & Rebuilt Davenport® parts and attachments 

Davenport Parts | Feed Gears | Spindle Gears | Turret Cams | Attachments | Cross Slide Cams

Davenport® Rebuilding 

Nowak is proud to present rebuilding choices from short blocks to complete rebuilt to turn key Davenport Model B.

Remanufactured Davenports® Model B and Machine enhancements